Backcountry Riding/Lift Access
The Kode 22 is a dedicated, technical backcountry snowplay pack designed specifically for backcountry and lift access riding.
420D HD nylon
420D hex rip nylon
Vertical Snowboard Carry (Step 1)
Reverb vertical snowboard carry utilizes a reinforced lower strap on the front panel of the pack and a stowable strap on the left shoulder harness that extends across the snowboard to the right side harness. Undo lower webbing strap completely via the slider buckle and thread the webbing from beneath the fabric overlay to extend.
Diagonal Ski Carry
Diagonal ski carry utilizes one side of the bottom front panel webbing and secures on the opposite side of the top front panel webbing.
Glove Friendly Buckles
Swift release glove friendly buckles release quickly with thumb and forefinger providing easy access to retained items.
Dual articulated zippered hipbelt pockets allow for one hand usage when stashing and accessing often needed smaller items.
Horizontal Backpanel Snowboard Carry (Step 1)
A reinforced hipbelt wing provides quick horizontal snowboard carry across the backpanel of the pack. Place the pack backpanel up on the ground and position snowboard base up horizontally across the pack’s backpanel, resting it on the reinforced hipbelt wings with the bindings on either side of the pack.
Horizontal Backpanel Snowboard Carry (Step 2)
Load the board and pack onto your back tensioning the hipbelt and harness to secure the board horizontally between the pack’s backpanel and your pack. Reverse to remove.
Hydration (Step 1)
An internal zippered backpanel hydration compartment with reservoir hanger and a fully insulated dual zippered harness router provide for hassle and ice free hydration. Slip your reservoir into the zippered compartment utilizing the reservoir hanger if needed.
Hydration (Step 2)
Route the hydration hose through the right harness strap for on-the-go water management.
Ice Tool Carry
A single ice tool loop at the base of the pack works in conjunction with the upper ski carry straps to provide stable and secure ice tool carry.
Stowable Helmet Carry (Step 1)
The Kode 32 features a stowable helmet carry system. Unzip the top slash compartment containing the helmet carry cap and extend from pocket andlocate the helmet icon at the top of the pack and click in helmet chinstrap.
Stowable Helmet Carry (Step 2)
Pull helmet cap over helmet and engage two male buckles into the two female buckles located opposite the load lifter straps at the top of the pack. Reverse to remove.
Top Stash Pocket
A top zippered stash pocket with heat embossed, non scratch coating provides the ideal place to stow goggles and other smaller items.
Vertical Snowboard Carry (Step 2)
Place the snowboard binding up into position and reattach the strap over the snowboard beneath the bindings, rethreading the webbing through the slider buckle and tensioning to secure.
The green to yellow zones represent the recommended load range for this pack.
Volumes and Weights
US and International weight and volume specifications
Dimensions are shown as length (height) x width x depth
IN: 20 x 11 x 11
CM: 50 x 28 x 27
IN: 22 x 11 x 11
CM: 55 x 29 x 29